[gate-users] regd GateCoincidences file

[Amarnath Srinivasan]

Hi yuxuan ,

Thanks for your reply. We have noticed that the last two columns have the Scanner Angular position. You can observe this if you run the benchmarkPET and enable Ascii output.  The degree of rotation 22.5 is present in the ascii output in the column 46. So I feel that it cant be the last two columns. Please inform me if you can make some omprovemnt on this and so will I. 

Thankyou

Amarnath Srinivasan
Research Assistant
Center for Advanced Imaging
PO Box 9235,
Dept of Radiology, HSC, WVU
Morgantown, WV 26506
amarnath at csee.wvu.edu
  ----- Original Message ----- 
  From: yuxuan.zhang at di.mdacc.tmc.edu 
  To: asrinivasan at hsc.wvu.edu ; GATE feedback and helpline for Users 
  Sent: Monday, August 02, 2004 10:41 AM
  Subject: Re: [gate-users] regd GateCoincidences file



  Hi, 

  When I was using cylindricalPET system for my simulation, I found that 
  the ASCII output file for coincidences consists of 46 columns. Column 1 to 23 
  are for the first singles, and column 24 to 46 are for the second singles. 
  The first 21 columns of each singles are describe by the manual, and the 
  extra 2 columns seemed of no use (always be zero). 

  yuxuan zhang 




------------------------------------------------------------------------------


  _______________________________________________
  gate-users mailing list
  gate-users at lphe1pet1.epfl.ch
  http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20040802/565808d8/attachment.htm>