<div dir="ltr">Dear Gate-users,<div><br></div><div>I am defining a "general trapezoid" volume to the crystal and it works fine when I only look at the geometry. However, when I try to attach the sensitive detector to the crystal, the simulation breaks and fails. Please see below the set-up:</div><div><br>/gate/systems/cylindricalPET/crystal/attach   crystal<br>/gate/crystal/attachCrystalSD<br clear="all"><div><br></div><div>The Break message is attached. Nevertheless, when I define the geometry to "box", everything is fine. Does someone have experience with this or is there a bug in the trapezoid volume for attachCrystalSD? I have also tried "wedge" volume and the simulation breaks, too. Any suggestions would be highly appreciated!</div><div><br></div><div>Thank you!</div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div dir="ltr"><div dir="ltr">Xinjie Zeng<div>Ph.D. student <br><div>Department of Electrical and Computer Engineering & Radiology</div></div><div>Stony Brook University</div></div></div></div></div></div></div>