<div dir="ltr"><div>Hi Gate Users,</div><div><br></div><div>I am modelling a physical SPECT system in GATE, and so trying to get my simulation parameters as close as possible to the physical system parameters. I am slightly confused about the energy resolution settings within GATE. When I set the energy resolution in the digitizer to match the measured energy resolution of my physical system (0.095, 9.5%) the energy spectrum output shows a FWHM of my photo peak of ~10.6%. When I reduce the given energy resolution to 0.085, I get a FWHM of 9.5%. The EnergyOfReference is the same as the value of the photo peak of my spectrum. What I have is usable, but I am very interested to know if anyone has an explanation for this difference.</div><div><br></div><div>The energy resolution section of my digitizer macro reads:<br># Energy Blurring<br>/gate/digitizer/Singles/insert blurring<br>/gate/digitizer/Singles/blurring/setLaw inverseSquare<br>/gate/digitizer/Singles/blurring/inverseSquare/setResolution 0.085<br>/gate/digitizer/Singles/blurring/inverseSquare/setEnergyOfReference 140.0 keV</div><div><br></div><div>I am using vGate v9.0</div><div><br></div><div>Cheers,</div><div>Miriam<br></div><div><br></div></div>