[G4] [G4] ************************************************************** [G4] Geant4 version Name: geant4-10-05-patch-01 (17-April-2019) [G4] Copyright : Geant4 Collaboration [G4] References : NIM A 506 (2003), 250-303 [G4] : IEEE-TNS 53 (2006), 270-278 [G4] : NIM A 835 (2016), 186-225 [G4] WWW : http://geant4.org/ [G4] ************************************************************** [G4] [Core-0] Initialization of geometry [Core-0] Initialization of physics [Core-0] Initialization of actors [Core-0] [Core-0] ************************************************* [Core-0] GATE version 8.2 (February 2019) [Core-0] Copyright : OpenGATE Collaboration [Core-0] Reference : Phys. Med. Biol. 49 (2004) 4543-4561 [Core-0] Reference : Phys. Med. Biol. 56 (2011) 881-901 [Core-0] Reference : Med. Phys. 41(6) (2014) [Core-0] http://www.opengatecollaboration.org [Core-0] ************************************************* [Core-0] [Core-0] You are using Geant4 version 10.5.1 [Core-0] Starting macro mac/angularResponseFunctionSPECT.mac [Physic-0] The following Geant4's physic-list is enabled :emstandard_opt1 GateSPECTHeadSystem::setARFStage stage = useTables 2 GateVObjectCreator::AttachARFSD() :::: created an attachment to ARF Sensitive Detector 0x555f228dc020 Nb Of Tables 0 -1 the size 0 -1 ---------------------------------------------------------------------------------------------- GateARFTableMgr::ListTables() List of the ARF Tables for ARF Sensitive Detector systems/SPECThead [Core-0] Initialization of geometry [Core-0] Initialization of physics [Core-0] Initialization of actors [Acquisition-0] [Acquisition-0] ============= Source initialization ============= [Acquisition-0] [Acquisition-0] ============= Acquisition starts! ============= [Acquisition-0] Simulation start time = 0 sec [Acquisition-0] Simulation end time = 1 sec [Acquisition-0] Simulation will have = 1 run(s) ---------------------------------------------------------------------------------------------- GateProjectionSet::Reset detected ARF tables for Production Use m_ARFdata = 0 ARF projection bins allocated at 0x555f22ad9b60 ARF projection bins allocated at 0x555f22aed3f0 ARF projection bins allocated at 0x555f22b00c80 ARF projection bins allocated at 0x555f22b14510 ARF projection bins allocated at 0x555f22b27da0 [Acquisition-0] Slice 0 from 0 to 1 s [slice=1 s] GateProjectionSet::Reset : Estimated size for the Binary Projection Output file 0.0762939 Mo GateProjectionSet::Reset : Estimated size for the Binary Projection Output file 78.125 Ko ### === Deexcitation model UAtomDeexcitation is activated for 3 regions: DefaultRegionForTheWorld 1 1 1 SPECThead 1 1 1 phantom 1 1 1 ### === G4UAtomicDeexcitation::InitialiseForNewRun() ### === Auger cascade flag: 1 ### === Ignore cuts flag: 0 ### === PIXE model for hadrons: Empirical ### === PIXE model for e+-: Livermore phot: for gamma applyCuts:1 SubType=12 BuildTable=0 LambdaPrime table from 200 keV to 100 TeV in 61 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== LivermorePhElectric : Emin= 0 eV Emax= 100 TeV SauterGavrila Fluo compt: for gamma applyCuts:1 SubType=13 BuildTable=1 Lambda table from 100 eV to 1 MeV, 7 bins/decade, spline: 1 LambdaPrime table from 1 MeV to 100 TeV in 56 bins ===== EM models for the G4Region DefaultRegionForTheWorld ====== Klein-Nishina : Emin= 0 eV Emax= 100 TeV conv: for gamma applyCuts:1 SubType=14 BuildTable=1 Lambda table from 1.022 MeV to 100 TeV, 18 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BetheHeitler : Emin= 0 eV Emax= 80 GeV ModifiedTsai BetheHeitlerLPM : Emin= 80 GeV Emax= 100 TeV ModifiedTsai msc: for e- SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV eIoni: for e- SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.8, 1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV eBrem: for e- SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai CoulombScat: for e-, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV msc: for e+ SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 MeV Nbins=42 100 eV - 100 MeV WentzelVIUni : Emin= 100 MeV Emax= 100 TeV Nbins=42 100 MeV - 100 TeV eIoni: for e+ SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.8, 1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MollerBhabha : Emin= 0 eV Emax= 100 TeV eBrem: for e+ SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 LPM flag: 1 for E > 1 GeV, VertexHighEnergyTh(GeV)= 100000 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eBremSB : Emin= 0 eV Emax= 1 GeV ModifiedTsai eBremLPM : Emin= 1 GeV Emax= 100 TeV ModifiedTsai annihil: for e+, integral:1 applyCuts:1 SubType=5 BuildTable=0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eplus2gg : Emin= 0 eV Emax= 100 TeV CoulombScat: for e+, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from 100 MeV to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 100 MeV Emax= 100 TeV msc: for proton SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV hIoni: for proton SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV hBrems: for proton SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied hPairProd: for proton SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001; from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for proton, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for GenericIon SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV ionIoni: for GenericIon SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.02 Stopping Power data for 17 ion/material pairs ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV msc: for alpha SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== UrbanMsc : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV ionIoni: for alpha SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.02 ===== EM models for the G4Region DefaultRegionForTheWorld ====== BraggIon : Emin= 0 eV Emax=7.9452 MeV BetheBloch : Emin=7.9452 MeV Emax= 100 TeV msc: for anti_proton SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV hIoni: for anti_proton SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 2 MeV BetheBloch : Emin= 2 MeV Emax= 100 TeV hBrems: for anti_proton SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied hPairProd: for anti_proton SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 17x1001; from 7.50618 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for anti_proton, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon+ SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV hIoni: for kaon+ SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV hBrems: for kaon+ SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied hPairProd: for kaon+ SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001; from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for kaon+, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for kaon- SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV hIoni: for kaon- SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=1.05231 MeV BetheBloch : Emin=1.05231 MeV Emax= 100 TeV hBrems: for kaon- SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied hPairProd: for kaon- SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 18x1001; from 3.94942 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for kaon-, integral:1 applyCuts:1 SubType=1 BuildTable=1 Used Lambda table of kaon+ ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu+ SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0, polarAngLim(deg)= 180 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV muIoni: for mu+ SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax= 200 keV BetheBloch : Emin= 200 keV Emax= 1 GeV MuBetheBloch : Emin= 1 GeV Emax= 100 TeV muBrems: for mu+ SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied muPairProd: for mu+ SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001; from 1 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for mu+, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for mu- SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0, polarAngLim(deg)= 180 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV muIoni: for mu- SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax= 200 keV BetheBloch : Emin= 200 keV Emax= 1 GeV MuBetheBloch : Emin= 1 GeV Emax= 100 TeV muBrems: for mu- SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== MuBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied muPairProd: for mu- SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 21x1001; from 1 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== muPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for mu-, integral:1 applyCuts:1 SubType=1 BuildTable=1 Used Lambda table of mu+ ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi+ SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV hIoni: for pi+ SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== Bragg : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV hBrems: for pi+ SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied hPairProd: for pi+ SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001; from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for pi+, integral:1 applyCuts:1 SubType=1 BuildTable=1 Lambda table from threshold to 100 TeV, 7 bins/decade, spline: 1 ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV msc: for pi- SubType= 10 RangeFactor= 0.2, stepLimType: 0, latDisp: 0 ===== EM models for the G4Region DefaultRegionForTheWorld ====== WentzelVIUni : Emin= 0 eV Emax= 100 TeV Nbins=84 100 eV - 100 TeV hIoni: for pi- SubType=2 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 StepFunction=(0.2, 0.1 mm), integ: 1, fluct: 1, linLossLim= 0.01 ===== EM models for the G4Region DefaultRegionForTheWorld ====== ICRU73QO : Emin= 0 eV Emax=297.505 keV BetheBloch : Emin=297.505 keV Emax= 100 TeV hBrems: for pi- SubType=3 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 ===== EM models for the G4Region DefaultRegionForTheWorld ====== hBrem : Emin= 0 eV Emax= 100 TeV ===== Limit on energy threshold has been applied hPairProd: for pi- SubType=4 dE/dx and range tables from 100 eV to 100 TeV in 84 bins Lambda tables from threshold to 100 TeV, 7 bins/decade, spline: 1 Sampling table 20x1001; from 1.11656 GeV to 100 TeV ===== EM models for the G4Region DefaultRegionForTheWorld ====== hPairProd : Emin= 0 eV Emax= 100 TeV CoulombScat: for pi-, integral:1 applyCuts:1 SubType=1 BuildTable=1 Used Lambda table of pi+ ThetaMin(p) < Theta(degree) < 180; pLimit(GeV^1)= 0.139531 ===== EM models for the G4Region DefaultRegionForTheWorld ====== eCoulombScattering : Emin= 0 eV Emax= 100 TeV ### === Deexcitation model UAtomDeexcitation is activated for 3 regions: DefaultRegionForTheWorld 1 1 1 SPECThead 1 1 1 phantom 1 1 1 ### === G4UAtomicDeexcitation::InitialiseForNewRun() ### === Auger cascade flag: 1 ### === Ignore cuts flag: 0 ### === PIXE model for hadrons: Empirical ### === PIXE model for e+-: Livermore [Core-0] End of macro mac/angularResponseFunctionSPECT.mac Graphics systems deleted. Visualization Manager deleting...