[Gate-users] Gate ....

P. T. ptpphysics at gmail.com
Tue Aug 14 11:10:45 CEST 2018


Dear Dania Consuegra,
Your ideas are very much appreciated.
I think,  "using different Seed for less primary events and then unify all
the outputs" is a good choice for my simulation.
Can I use "/gate/random/setEngineSeed *auto*" to generate different
results?
Or, I should use
/gate/random/setEngineSeed 1
/gate/random/setEngineSeed 2
/gate/random/setEngineSeed 3
in three separate simulations.

Best Regards,
Pat

On Tue, Aug 14, 2018 at 3:44 AM, Dania Consuegra <dconsuegra88 at gmail.com>
wrote:

> Hi Pat
>
> Well, in my case with time Gate mymacro.mac is faster than for Gate -qt
> mymacro.mac....
> I don't think that the command that you are using affects the memory....
>
> The other thing that I used but for root. outpus when I have memory issues
> is to use different Seed for less primary events and then unify all the
> outputs....
> /gate/random/setEngineSeed 1
> .
> .
> .
>
> I already have your problem (complete collapsed system for memory issues)
> but with the specific MHD file, I never W....
>
> I now that there is another possibility (but, I never use it ) that is to
> simplify the simulation. Divide it into 2 ones...
>
> The output of the first part can be the input of the second one ....
>
> For my case, I just modified my source which was the problem and if i want
> to make some simulation with the original source one I just add different
> roots outputs....
>
> Good luck 😉
>
> Dania
>
> 2018-08-13 23:21 GMT+02:00 P. T. <ptpphysics at gmail.com>:
>
>> Dear Dania Consuegra,
>>
>> Thanks for your response.
>>
>> I had commented the visualization of my macro and had used
>> "Gate mymacro.mac" command to execution.
>>
>> But, my memory and swap system was filled up completely (16GB RAM).
>>
>> Is there any differences between  "time Gate mymacro.mac" and
>> " Gate mymacro.mac " commands?
>>
>> I think If MHD file can be stored in separate files in predefined time,
>> the problem can be solved.
>>
>> I would greatly appreciate further suggestions.
>>
>>
>> Best Regards,
>> Pat
>>
>> On Mon, Aug 13, 2018 at 7:04 PM, Dania Consuegra <dconsuegra88 at gmail.com>
>> wrote:
>>
>>> Hi Pat,
>>>
>>> I had a similar problem when I increase the number of primary events. I
>>> solved it by commenting the visualization of my macro and using for running
>>> Gate instead of Gate --qt mymacro.mac, time Gate mymacro.mac ....
>>>
>>> Good luck
>>>
>>> Dania
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20180814/40e7fe64/attachment.html>


More information about the Gate-users mailing list