[Gate-users] Detector response and FFDA

Shiras Abdurahman shiraska at gmail.com
Thu Nov 9 20:16:16 CET 2017


Hi,

Thank you very much for the answers. Earlier, I was using the detector
response present in the gate examples CT folder (vGATE 7.2). It looks like
this
0 1
1 0
Does this mean an ideal energy integrating detector with equal weighting
for all the energy bins?

Shiras

On Thu, Nov 9, 2017 at 2:05 PM, Simon Rit <simon.rit at creatis.insa-lyon.fr>
wrote:

> Hi,
> The detector response is a piecewise linear 1D function of the energy. The
> fist column is the energy of the incident photon in MeV in the default
> Geant4 energy (MeV if you haven't modified it). The second column is the
> corresponding measured signal in a unit that you chose.
> Simon
>
> On Thu, Nov 9, 2017 at 10:59 AM, Shiras Abdurahman <shiraska at gmail.com>
> wrote:
>
>> Hi,
>>
>> I am using FFDA for Flat panel detector CT projection. I would like to
>> use detector response corresponds to CsI detector. Do I need to specify the
>> energy bins keV or MeV since the X-ray source spectrum bins should be in
>> MeV? Since I do not need spectral projections, I set energyResolvedBinSize
>> to 0 keV. I am attaching my detector response text file where the bins are
>> specified in MeV.
>>
>> With regards,
>> Shiras
>>
>> _______________________________________________
>> Gate-users mailing list
>> Gate-users at lists.opengatecollaboration.org
>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20171109/d1804b6a/attachment.html>


More information about the Gate-users mailing list