[Gate-users] "gate/ecat/placement/setTranslation" COMMAND NOT FOUND

Machiel Kolstein mkolstein at ifae.es
Fri Apr 21 17:42:28 CEST 2017


Hi Uwe,

You're right. There are two problems though:
1) I have installed version 8.0 and this didn't come with examples (maybe I
did something wrong?) I do have an earlier version (v7.1) that does have
examples but I was afraid those might not work with version 8.0.
2) I was looking for an example specifically for a PET-like detector. I did
not find an example like that in v7.1 or anywhere else.

Cheers,

Machiel

On Fri, Apr 21, 2017 at 5:19 PM, Pietrzyk, Uwe <u.pietrzyk at fz-juelich.de>
wrote:

>
> Hello Machiel Kolstein,
>
> maybe it is a good idea to start learning about GATE by running
> the *examples*, that come with the distribution of GATE once
> your have installed it.
> What you found is probably only working with an older version of
> GATE, since the link tells it was from 2015.
>
> Kind regards,
>
> Uwe Pietrzyk
>
> /----------------------------------------------------------------------
> Prof. Dr. Uwe Pietrzyk
> Diplom-Physiker
> Institut für Neurowissenschaften und Medizin / INM-4
> Forschungszentrum Jülich GmbH
> 52425 Jülich
> Tel: +49-2461-61 4763 <+49%202461%20614763>
> Fax: +49-2461-61 2820 <+49%202461%20612820>
> Mobil: +49-162-103-4871 <+49%20162%201034871>
> eMail: U.Pietrzyk at fz-juelich.de
> http://www.fz-juelich.de/inm/inm-4/DE/Home/home_node.html
> &
> Bergische Universität Wuppertal
> Fakultät für Mathematik und Naturwissenschaften
> Büro:  D.08.01
> Gaußstr. 20
> 42097 Wuppertal
> Tel: +49-(0)202-439-3523 <+49%20202%204393523>
> Fax: +49-(0)202-439-2811 <+49%20202%204392811>
> eMail: Uwe.Pietrzyk at uni-wuppertal.de
> <Uwe.Pietrzyk at physik.uni-wuppertal.de>
> http://www.medizinphysik.uni-wuppertal.de
> ----------------------------------------------------------------------/
>
> On 21 Apr 2017, at 16:58, Machiel Kolstein <mkolstein at ifae.es> wrote:
>
>
> Hi,
>
> I just succesfully installed GATE version 8.0.
> To learn how to use GATE, I also downloaded an exercise from this page:
>   http://www.opengatecollaboration.org/Materials2015/
> PracticalExercises2015/PET
>
> However, when I try to run "Gate macros/Geometry.mac", I get the following
> error:
> [G4-cerr] ***** COMMAND NOT FOUND </gate/ecat/placement/setTranslation
> 0.0 0.0 0.0 cm> *****
>
> ​This is even though I installed "ecat7" and did a ccmake on GATE with
> "GATE_USE_ECAT7" is ON and the "ECAT7_HOME" directory is set.
>
> Cheers,
>
> Machiel
>
>
>
> --
> Avís - Aviso - Legal Notice - (LOPD) - http://legal.ifae.es
>
> Avís - Aviso - Legal Notice - (LOPD) - http://legal.ifae.es__________
> _____________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>
>
>


-- 
Avís - Aviso - Legal Notice - (LOPD) - http://legal.ifae.es

-- 
Avís - Aviso - Legal Notice - (LOPD) - http://legal.ifae.es
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20170421/44371724/attachment-0001.html>


More information about the Gate-users mailing list