[Gate-users] Gate digitizer error

Sonal Ambwani ambwani at bu.edu
Fri May 23 18:34:14 CEST 2008


Hi again,

I am getting the same error for benchmarkPET. I guess it might help to 
mention the macro here:

###GATE : benchmarkPET.mac
/gate/world/geometry/setXLength 150. cm
/gate/world/geometry/setYLength 150. cm
/gate/world/geometry/setZLength 150. cm

/control/execute camera.mac

/control/execute phantom.mac

/control/execute physics.mac

#       I N I T I A L I Z E
/gate/systems/cylindricalPET/verbose 0
/gate/geometry/enableAutoUpdate
/run/initialize


/gate/digitizer/Singles/insert adder
/gate/digitizer/Singles/insert readout
/gate/digitizer/Singles/readout/setDepth 1
/gate/digitizer/Singles/insert blurring
/gate/digitizer/Singles/blurring/setResolution 0.26
/gate/digitizer/Singles/blurring/setEnergyOfReference 511. keV
/gate/digitizer/Singles/insert thresholder
/gate/digitizer/Singles/thresholder/setThreshold 350. keV
/gate/digitizer/Singles/insert upholder
/gate/digitizer/Singles/upholder/setUphold 650. keV



#       C O I N C I    S O R T E R
/gate/digitizer/Coincidences/setWindow 120. ns
/gate/digitizer/Coincidences/MultiplesPolicy  takeWinnerOfGoods

/gate/digitizer/name delay
/gate/digitizer/insert coincidenceSorter
/gate/digitizer/delay/setWindow 120. ns
/gate/digitizer/delay/setOffset 500. ns
/gate/digitizer/delay/MultiplesPolicy  takeWinnerOfGoods

/control/verbose 0
/grdm/verbose 0
/run/verbose 0
/event/verbose 0
/tracking/verbose 0
/gate/application/verbose 0
/gate/generator/verbose 0
/gate/stacking/verbose 0
/gate/event/verbose 0
/gate/source/verbose 0

/control/execute sources.mac

#       O U T P U T

/gate/output/verbose 0


/gate/output/ascii/setOutFileHitsFlag 1
/gate/output/ascii/setOutFileSinglesFlag 1
/gate/output/ascii/setOutFileCoincidencesFlag 1
/gate/output/ascii/setOutFiledelayFlag 1

/gate/output/root/setFileName benchmarkPET
/gate/output/root/setRootHitFlag 0
/gate/output/root/setRootSinglesFlag 0
/gate/output/root/setRootCoincidencesFlag 1
/gate/output/root/setRootdelayFlag 1
/gate/output/root/setRootNtupleFlag 0
/gate/output/root/setSaveRndmFlag 0


#       S T A R T
/gate/application/setTimeSlice     120. s
/gate/application/setTimeStart     0.  s
/gate/application/setTimeStop      240. s
/gate/application/startDAQ



Quoting Sonal Ambwani <ambwani at bu.edu>:

> Dear Gate-users,
>
> I am suddenly getting the following error while running benchmarkSPECT :
>
> /gate/physics/setXRayCut 200. keV
> /gate/physics/setElectronCut 1. km
> /gate/physics/setDeltaRayCut 1. GeV
> /run/initialize
> WARNING !
>   SetCutValueForOthers became obsolete.
>   It is harmless to remove this invokation without any side effects.
>   This dummy method implementation will be removed soon.
> /gate/digitizer/Singles/insert adder
> ***** COMMAND NOT FOUND </gate/digitizer/Singles/insert adder> *****
>
> ***** Batch is interupted!! *****
> Idle>
>
> Can someone please point out what might be wrong. This was working till
> a few days ago.
>
> Sonal Ambwani
>
> Dept. of Electrical and Computer Engineering
> Boston University
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.healthgrid.org
> http://lists.healthgrid.org/mailman/listinfo/gate-users
>



Sonal Ambwani

Dept. of Electrical and Computer Engineering
Boston University




More information about the Gate-users mailing list